The Combination of Speed,Durability and Stability
Measurement Principle
When the object is caught by laser beam passed through lens, a
bright and dark area will be formed on CCD,then the object
dimension will be accurately calculated through software analysis
and calculation.
Strong Adaptability to Mist and Dust
Precision CNC manufacturing, with impact resistance of 10G/6ms,
vibration resistance of 10-55Hz/1.5 in XYZ for 2 hours, preventing
the
optical parts from damaging.
Individual temperature compensation technology enables the device
measurement results not to be affected by temperature change.*
*The measurement diameter change will be≤0.001mm if object diameter
is 10mm.
Measurement is accurate even if there is water and dust
Thanks to individual optical system and measurement algorithm, the
measurement data of TL-2025D is still accurate at complex
environment.
Application
Touch Screen,Computer,Cellphone
DALA TL-2025D can be managed by touch screen,computer and
cellphone,like parameter setting ,measurement data management ,and
so on,customers can choose as their application request.
Technical Specification
| Model | TL-2025D |
|---|
| Axis | 2-axis |
| Measurement data | Diameter &Ovality,Width&Thcikness, Lump&Necks |
| Application field | Round wire ,Transparent wire, Flat wire |
| Sampling frequency | 10KHz(signal axis) |
| Measurement range | 0.2~25mm |
| Repeatability(1) | ±0.1μm |
| Measurement accuracy(2) | ±2μm |
| Dimensional | 296*270*54mm |
| Working power | 24V ±10% 40VA |
| Display | LED |
| Communication port | Default:WIFI,RS485 MODBUS RTU,CAN
Option:PROFIBUS,PROFINET, EtherNet/IP Industrail bus and Industrial
EtherNet,etc. |
| Electrical port | Default:Digital output (relay), Digital input,Analog input encoder
pulse input port.
Option: PI feedback control(3) |
| Environmental adaptability | Working Environment | 0~50 ℃ |
| Working Environment | 20~85%RH(No condensation) |
| Working environmental brightness | Brightness of working environment Incandescent light, fluorescent
lamp 3000lx or less |
| Vibrating resistance | 10~55Hz full amplitude 1.5mm in XYZ direction for 2 hours |
| Impact resistance | 10G/6ms |
| Data colletion & analysis | DMS1000 measurement software system,DS14 ZT display and control
system |
| Out-of-tolerance alarm | Support |
| Transparent mode | Support |
| Water-proof grade | IP65 |
Note:
(1)Set the average number of times to 1150 and measure the ±2σ
value of the round standard rod of diameter 10mm at the measurement
area center;
(2)For object diameter of 10mm, the measurement accuracy is ±2um
when it moves in the center of 8*8mm；
(3)PI feedback control option shall be ordered at placing device
order.
