Simple Structure, Long Durability
F2030-K utilizes laser diffraction measurement method, which is
renowned for its straightforward design and exceptional accuracy.
The device doesn't have moving part, like motor, making it free
from maintenance.
The measurement objects includs electric wire and cable, steel wire
and tube, hose and pipe etc.
Single axis sampling frequency of 5KHz
Due to the lack of constraints on motor running speed, the F2010-K
boasts a sampling frequency of up to 5 kHz. This enables
comprehensive data collection about the object being measured,
setting it apart from other devices.
Applications
Touch Screen,Computer,Cellphone
DALA F2030-K can be managed by computer ,cellphone and touch
screen,like parameter setting ,measurement data management ,
and so on,customers can choose as their application request.
Technical Specification
| Model | F2030-K |
|---|
| Axis | 2-axis |
| Measurement data | diameter and ovality, lump and necks |
| Frequency | 10KHz(5KHz/axis/second) |
| Measurement range | 0.5~30mm |
| Repeatability(1) | ±0.2μm |
| Accuracy(2) | ±(0.001+0.01%*D)mm |
| Min defect height | 0.01mm |
| Min defect length(3) | 0.4mm(wire speed120m/min)
1.6mm(wire speed500m/min) |
| Size | 280*245*58mm |
| Working power source | 24V ±10% 40VA |
| Running temperature | 5℃~50℃ |
| Display | LED display |
| Commuincation port | Standard:WIFI,RS485 MODBUS RTU,CAN
Option:PROFIBUS,PROFINET, EtherNet/IP,EtherCAT,PI feedback control(4) |
| Electrical port | Standard: digital output(relay),digital input,analog input,encoder
pulse input port
Option:PI feedback control |
| Data colletion & analysis | available (option DS14 ZT display and control system,DMS1000) |
| Out-of-tolerance alarm | available |
| Transparent mode | available |
Note:
(1) set sliding window as 100ms, outside diameter repeatability of
φ1mm round rod at measurement center area
(2) set sliding window as 100ms, outside diameter deviation of φ1mm
round rod at measurement area
(3)set defect measurement average time as 0ms, the minimum defect
length which cannot be missed at the measurable area
(4)PI feedback control is option, but must order at placing order
